Apron feeders, belt width 1800 mm

The apron feeders are intended for even feeding of bulk materials with density not exceeding 2.4 tons/cub.m, with lumpiness not exceeding 0.5 of the belt width and with mass of lump not exceeding 500 kg in working machines or to transport mechanisms; may be installed horizontally as well as with inclination to horizon up to 15°.

Apron feeder is an endless multiple-strand chain leaning on the upper and bottom pulleys, mounted in bearings on frame.

The feeders are intended for work in microclimatic conditions with moderate climate (version U) or dry or wet tropical climate (version T) with location category 3 according to GOST 15150–69. Apron feeder consists of the following units: welded frame, feeding element — the belt of the feeder, upper and bottom bearing of pulleys, drive (gearbox TS-1450, electric motor, slow-speed (tooth) and high-speed (petal) couplings, drive shaft with sprockets, tension shaft with plain rollers and screw tension device, covers.

The feeders are made as short pallet conveyors. The feeders are driven by four-speed AC electric motors in blow over version providing stepped adjustment of the movement speed of the belt of the feeder and respectively its production capacity.

Apron feeders with belt width 1800 mm are intended for even feeding of bulk materials with lump fineness not exceeding 900 mm.

Specifications

Model Capacity, cub.m/hour Belt speed, m/sec Distance between axes drums, mm
2-18-30 325/480/650/960 0.08, 0.12, 0.16, 0.25 3000
2-18-45 4500
2-18-60 6000
2-18-90 9000
2-18-120 12000
Model Motor output, KW Operation weight, kg Overall dimensions, mm
2-18-30 15/25/30/36 18630 4730 (5542)х5095х1768
2-18-45 22930 6230 (7042)х5095х1768
2-18-60 26430 7730 (8542)х5095х1768
2-18-90 33765 10730 (11542)х5095х1768
2-18-120 41160 13730 (14542)х5095х1768

 

Apron feeders catalogue(pdf, 223.1 Kb)

Apron feeders order form(pdf, 233.5 Kb)